Router Table and Fence System - for Kobalt 24-Volt Max Router - DIY
$74.99
This is a fully functioning Compact, and Portable, Router Table that was purpose built for the Kobalt 24-Volt Max Router. It comes with a rectangle router plate in order to mount in the table.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.
Option:
Dust Port:
Quantity:
This is a fully functioning Compact, and Portable, Router Table that was purpose built for the Kobalt 24-Volt Max Router. It comes with a rectangle router plate in order to mount in the table.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.
This is a fully functioning Compact, and Portable, Router Table that was purpose built for the Kobalt 24-Volt Max Router. It comes with a rectangle router plate in order to mount in the table.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.
New and improved Fence for better dust control. Choose either Festool 27mm port or 2.5” dust port. (Some photos may show old style)
Ryobi, Milwaukee, Hercules, and a DIY Plate available as well. See my store.
Made out of Premium Baltic Birch Plywood. The table is 3/4" and the fence is 1/2".
You are purchasing all the parts in order to save a little money and put it together yourself. At checkout choose your dust port size, 27mm Festool or a 2.5".
This router table is the perfect size. Too large and it wouldn't clamp up safely. Too small and it wouldn't handle a fence and dust control. Having said that, this router table is not for big projects. This is a trim router so it's meant to handle smaller items. I have used a version of it for months in my shop. I made it for myself (and the Milwaukee router) because I was running so much small stuff all at once that I would fatigue and felt unsafe with the handheld router. The Milwaukee is heavier than any other trim router I've used. Maybe its that big M18 battery sitting on top? Now, I can clamp it up and edge dress boards very quickly without tiring.
I was also using the Kobalt router because I was too lazy to change bits all the time! I can use one for roundovers and one for flush trimming!
I wanted my table to be able to clamp up to my workbench without using special clamps. I didn't want to buy anything new. Notice in my photos that the table is very stable with two simple and small clamps. Most tables I see online have a VERY LARGE infeed portion of the table which I feel may cause some instability. Depends on the clamping. My table is sized for the clamps used.
What you get: Unassembled table, Fence, T-Track, Two knobs with T-Nuts.
How you get it as follows:
DIY - You still get a complete package of parts. (table, fence, knobs, t-track) You get to put it together! The fence will come in a sheet that you will cut the parts out and glue together. You will get comprehensive directions on how to put it all together.
Router, battery, clamps, and other background items in photos not included.
ATTENTION: This is the KOBALT listing. I have Milwaukee, Ryobi, and Hercules options as well.I will work on more routers and plates in the future. Message me with which one you need.
If you have a different router and want to drill the holes in the plate yourself, check the Ryobi listing in my store. There is a DIY Plate option. https://www.etsy.com/listing/1872380377/ryobi-router-table-and-fence-system-with
Table 19" wide, 13" Deep
Fence 13" wide
Here is the router it was designed for - https://www.lowes.com/pd/Kobalt-24V-MAX-24-Volt-1-4-in-Variable-Speed-Brushless-Fixed-Cordless-Router-Bare-Tool/1001864244? (it is not included)
Factory Seconds / Scratch and Dent may be available from time to time - If I have a unit with a ding or scratch in it you will see it in the price list. I'll discount it a few bucks. They are otherwise 100% functional.